DB Drive 10″ PRO Series Midbass, 4 Ohm
-
DB Drive 10″ PRO Series Midbass, 4 Ohm
In Stock - Ships in 24-48 hours
The WDXPRO-MB10-4 is a 10-inch midbass speaker engineered for extreme high-output car audio systems. It features a 3.0″ high-temperature voice coil with a shorting ring, paired with a ferrite oxide magnet for superior power handling. The treated paper cone and cloth surround are optimized to deliver precise midbass frequency response and exceptional output performance. With a dynamic power handling of 3500 watts and a nominal power rating of 1500 watts, this speaker is built for unmatched performance and durability.
Features:
• 3.0″ High Temperature Voice Coil with Shorting Ring
• High Strength Ferrite Oxide magnet
• Treated Paper Cone with Cloth Surround
• Extreme Output Capability
• Die-Cast Aluminum Basket
• EVA Mounting gasket
• Compression Speaker terminals
Note: Sold as each
Specs
| Dynamic Power Handling: | 3500 Watts |
| Nominal Power Handling: | 1500 Watts |
| Impedance: | 4Ω Voice Coil |
| Resonant Frequency (fs): | 83.7 Hz |
| D.C. Voice Coil Resistance (Re): | 4Ω |
| Mechanical Quality Factor (Qms): | 3.22 |
| Electrical Quality Factor (Qes): | 0.54 |
| Total Quality Factor (Qts): | 0.46 |
| Equivalent Air Volume to Cms (Vas): | 7.6 L |
| Mass of Diaphragm/Coil (Mms): | 75.0 g |
| Force Factor (BL): | 14.4 |
| Sound Pressure Level (SPL): | 91.1 dB |
| Outside Diameter: | 10.45″ |
| Cutout Diameter: | 9.22″ |
| Mounting Depth: | 6.69″ |
