AFK Center stand will work with cross under exhaust. It will also work with all air ride units.

AFK Electric Center Stand fits 2017-Present Touring Models. AFK Center Stand was designed for cross over exhaust, and comes in a Gloss Black finish. AFK Touring Electric Stands comes with two set of leg kits. 90% of our customers utilize Kit #2. All non-raked bikes use Kit #2. The AFK Touring Electric Center Stand (Standard Pack) comes with three sets of stackable/inserts (shims) and one set of end caps. Additional stackable/inserts (shims) may be added.

Kit #1: L1 set & L2 set

Kit #2: L2 set & L3 set

L1 Height is approximately 1-1/2″ | L1 Leg range with standard pack is approximately 1-1/2″-3″.

L2 Height is approximately 2-1/2″ | L2 Leg range with standard pack is approximately 2-1/2″-4″.

L3 Height is approximately 3-1/2″ | L3 Leg range with standard pack is approximately 3-1/2″-5″. (measurement from bolt hole)

Here is a list of confirmed stock exhaust that is compatible with the AFK Touring Center Stand:

• Stock D&D w/ghost pipe

• Stock Reinhart

• Stock Bassani w/ghost pipe

• TAB Performance

• Vance & Hines Power Duals

• Will NOT work with Khrome Werks exhaust.

Notes:

• Lead time is 2-3 weeks

• When air ride is fully extended drive belt can possibly contact stand, and should never be ridden fully extended.

• Drive belt should be tightened to manufacture specs at desired “ride height”. Failure to do so can also result in belt contacting top of center stand.